Skip to content
Professional tracker · NB-IoT + LTE-M

GPS tracker COMPACT 1115
Compact format, NB-IoT + LTE-M, up to 8 years battery life

REF. 1115 · GPS · GALILEO · Wi-Fi · BLE 5.0 · NB-IoT · LTE-M

The smallest industrial tracker in the range. Ultra-compact format with multi-technology positioning: GNSS, Wi-Fi and BLE beacons. Dual NB-IoT and LTE-M connectivity across Europe and North America, up to 8 years of battery life and a replaceable battery pack.

Up to 8 years IP68 · Flame-retardant 95 g · 105×54 mm GNSS + Wi-Fi + BLE 5.0 NB-IoT + LTE-M Replaceable battery 5 built-in sensors
TRAKmy COMPACT 1115 GPS tracker – NB-IoT and LTE-M, compact format
IP68
Waterproof · Flame-retardant
4,600 mAh
3 to 8 years · replaceable
Wi-Fi
+ GNSS + BLE
3–8 years
Estimated battery life
IP68
Waterproof · Flame-retardant
95 g
The most compact
5 sensors
Built in as standard
COMPACT 1115 – small tracker, broad versatility
Compact format

Small format,
broad versatility

At just 105×54×21.5 mm and 95 g, the COMPACT fits anywhere, on the smallest assets or wherever space is limited.

The smallest industrial tracker in the range
Ultra-flat Lexan 943A polycarbonate casing (21.5 mm thick), white, UV-stabilised and flame-retardant. Ideal for narrow assets, crates or low-clearance equipment.
IP68 · Flame-retardant · UV-stabilised
Built to withstand immersion, UV exposure and flame-retardant environments, certified for extended industrial use.
COMPACT 1115 indoor and outdoor positioning
Positioning

Triple positioning
technology

GNSS outdoors, Wi-Fi scanning or BLE beacons indoors. The tracker switches automatically to the most accurate technology for the environment.

Multi-constellation GNSS, GPS + GALILEO
Patch antenna for optimal outdoor accuracy. Configurable priority sequence between GNSS, Wi-Fi and BLE.
Indoor Wi-Fi scanning at 2.4 GHz
Positioning based on surrounding Wi-Fi networks for zone-level accuracy in a warehouse, workshop or building, with no dedicated infrastructure.
BLE 5.0 beacons for zone accuracy
Detects TRAKmy proximity beacons and is detectable by zone anchors. Quuppa-tested for high-precision positioning, independently of Wi-Fi.
COMPACT 1115 adaptive behaviour
On-board intelligence

Automatic
adaptive behaviour

The tracker automatically detects departure and arrival phases to optimise its power consumption and the relevance of its data.

Automatic motion / stop detection
High positioning frequency while moving, low-power sleep mode when stationary, fully automatic and configurable over the air.
Fully configurable remotely (OTA)
Every parameter (frequency, positioning technology, alert rules) can be changed over NB-IoT, LTE-M or BLE with no physical handling. Data not transmitted in dead zones is recovered automatically.
BLE 5.0
Compatible TRAKmy sensors
Temperature
SENSE T 4000 / T 4004
−40°→+85°C
Temp. + Humidity
SENSE HT 4050
0–100% RH
Fill level
SENSE FL 4300
Threshold alerts
Magnetic contact
SENSE M 4201
Open/closed
Electrical current
SENSE CU 4600
AC/DC
Expandable range
New sensors over the air
Coming soon
External BLE sensors

Enrich your
asset data

The COMPACT connects to the full range of TRAKmy BLE environmental sensors, with no wiring and no complex installation.

Temperature & humidity
Real-time condition monitoring for sensitive assets, goods or equipment.
Fill level
Measurement for skips, tanks or containers. Configurable threshold alerts.
Contact & current
Open/close detection and AC/DC current measurement: access traceability and consumption.
Built-in sensors

5 internal sensors as standard

Activity, orientation, tamper protection, temperature and shock: all native, with no additional wiring.

Activity
Sub-minute measurement of movement and vibration to calculate the real operating hours of your assets.
Sub-minute accuracy · OTA
Orientation
Detects the orientation and tilt of the asset. Alerts if the tracker is turned over or tilted abnormally.
Configurable · Real time
Virtual tamper
Detects opening, handling or removal attempts with no physical sensor. Fully configurable software algorithm.
Configurable algorithm · OTA
Temperature
Built-in monitoring from -20 °C to +60 °C with configurable thresholds and alerts. No external sensor needed for everyday use.
±0.25 °C typical, ±1 °C worst case · Threshold alerts
Shock
Configurable shock detection: threshold and sensitivity adjustable remotely to distinguish normal handling from a transport incident.
Configurable threshold · OTA
External BLE sensors

Expandable to your needs

Connect several TRAKmy BLE sensors to the same tracker. Further models can be added as the range evolves.

Temperature
SENSE T 4000 / T 4004
Temperature + Humidity
SENSE HT 4050
Fill level
SENSE FL 4300
Magnetic contact
SENSE M 4201
Electrical current
SENSE CU 4600
Other BLE sensors
Expandable range
Specifications

Full
technical datasheet

Compact in size, complete in features. Built for assets where space is limited.

TRAKmy COMPACT 1115 GPS tracker
Download the datasheet PDF
Weight95 g (3.4 oz)
Dimensions105 × 54 × 21.5 mm
ReferenceCOMPACT 1115
ColourWhite
CasingLexan 943A polycarbonate · Flame-retardant · UV-stabilised
Ingress protectionIP68
ConnectivityNB-IoT + LTE-M · European & North American bands · Extended plan included
CommunicationBidirectional · Data recovery (dead zones)
GNSSMulti-constellation chipset: GPS + GALILEO
Wi-FiScanning 2.4 GHz
BLEBluetooth Low Energy 5.0 · Proximity beacons · Zone anchors and high precision (Quuppa-tested)
AntennasAll internal · Omnidirectional
BatteryLi-MnO₂ 3.0 V · Replaceable pack
Capacity4,600 mAh · 3,0 V
Battery life3 to 8 years depending on operating mode
Temperature-20 °C to +60 °C · Built-in sensor ±0.25 °C typical, ±1 °C worst case
Built-in sensorsActivity · Orientation · Virtual tamper · Temperature · Shock
External BLE sensorsTemperature · Humidity · Fill level · Contact · Magnet
ActivationMagnetic · Green / red LED
OTA firmwareNB-IoT, LTE-M + BLE · AES encrypted + signed
EncryptionChaCha20 · Unique keys per device
Mounting2 holes · 6×8 mm · 90 mm apart
CertificationsRegulatory · Bluetooth 5.0 · Electrical safety: in progress
ℹ Replaceable battery pack

The 4,600 mAh Li-MnO₂ pack can be replaced at end of life: the tracker is not scrapped, which extends its service life and lowers total cost of ownership across a fleet. The platform provides a battery life prediction so replacements can be anticipated.

Deployment

Magnetic activation · 3 steps

A single magnet. No tools. No interface. LED feedback shows the status in real time.

1
Hold the magnet for ~5 seconds

Hold it against the tracker logo. Outdoors, with a clear view of the sky, for the first network connection.

2
Red LED: keep the magnet in place

Activation in progress. Do not remove the magnet while the red LED is lit.

3
Green LED flashing: ready

Remove the magnet. The tracker is activated and ready to be installed on the asset.

LED feedback

Green LED : Activated, running

Red LED : Activation in progress

No LED : Battery flat

Flashing red : Tracker busy

Field installation tips

Mount as high as possible for better network coverage.
Install vertically, logo facing up, with a clear view of the sky.
Avoid metal or carbon above the tracker, which blocks RF signals.
A flat, clean and degreased surface for optimal adhesion.
🌡
On metal exposed to sunlight: add a thermal insulator underneath.
💧
Avoid low points where water collects, even with IP68.
⚠ Network connection delay

If "online" does not appear within 5 minutes, hold the magnet against the tracker again for 5 seconds. It retries automatically after 24 hours. The tracker switches between NB-IoT and LTE-M on its own, depending on available coverage.

Services

Remote management & OTA

The COMPACT 1115 is managed entirely from the platform, with no physical handling.

01
Diagnostics
  • Battery life prediction
  • Detailed energy consumption
  • Positioning diagnostics
  • NB-IoT / LTE-M communication quality
  • Installation status
02
Remote management
  • OTA firmware over NB-IoT, LTE-M + BLE
  • Full OTA configuration
  • Tracker usage profiles
  • External BLE sensor management
  • Rules engine & time sync
03
Application services
  • Location & journeys
  • Operating hours
  • Orientation, tamper, temperature & shock
  • BLE condition monitoring
  • Data recovery in dead zones
Certifications

Built for Europe and North America

NB-IoT and LTE-M bands for Europe and North America. Regulatory, Bluetooth 5.0 and electrical safety approvals are in progress for the COMPACT 1115.

IP68
Prolonged immersion
Flame-retardant
Lexan 943A · UV
Quuppa
High-precision indoors
ChaCha20
End-to-end encryption
AES
Encrypted & signed firmware

Field installation

6 mounting options

From permanent high-strength mounting to instant temporary fitting.

Mounting holes: 2 positions · 90 mm apart · 6×8 mm openings
🔩
Rivets
Permanent fixing

Quick, permanent fitting through the 2 mounting holes (90 mm apart, 6×8 mm openings). Ideal on metal crates and perforated structures.

PermanentQuick fitting
🔩
Screws & nuts
Removable fixing

Bolted through the casing eyelets. Removable with standard tools. Suited to flat, drillable surfaces (metal, wood, composite).

RemovableFlat surfaces
🪢
Cable ties
Tubes · Bars · Profiles

Plastic or stainless steel ties passed through the tracker eyelets. Compatible with tubes, bars, frames and profiles of any section. Drill-free fitting.

Drill-freeVersatile
🏭
Industrial adhesive
Non-drillable surfaces

High-strength structural adhesive. The casing bonds directly to clean, degreased surfaces. Resistant to weather and vibration.

⚠ Difficult to remove once cured.

StructuralAll surfaces
🧲
Magnetic mounting kit
Removable · Instant

A magnetic plate screwed onto the casing. Fitted and removed in seconds on any ferrous surface. Ideal for shared assets or frequent rotation.

RemovableSteel · Ferritic stainless
🏷️
Double-sided tape
Drill-free · Smooth surfaces

High-strength double-sided adhesive foam applied under the casing. Permanent adhesion on plastic, painted metal and composite. UV and weather resistant.

⚠ Degrease the surface before fitting.

Drill-freeUV-resistant
SaaS platform

Say goodbye to
spreadsheets & logbooks

The TRAKmy platform turns your assets' location, activity and condition data into concrete, actionable information. Accessible to everyone, with no IT skills required.

TRAKmy platform interface – asset map
Real-time location
A unified map of all your assets, with journey history and zone presence.
Alerts & geofences
Instant notifications on zone entry/exit, abnormal activity or sensor anomaly.
Condition monitoring
Real-time monitoring of BLE sensor data (temperature, humidity, fill level) with alert thresholds.
Search & inventory
Locate any asset in seconds from the unified search engine.
Reports & utilisation
Utilisation dashboards, operating hours and activity rate per asset or per fleet.
OTA updates
Firmware and configuration updated remotely over NB-IoT, LTE-M or BLE. No physical intervention required.
Subscriptions

Choose your plan

Essential
  • Map & journey history
  • Basic geofences & entry/exit alerts
  • iOS & Android mobile app
  • Customisable dashboards
  • Pull & Push API
  • 12-month data retention
  • 50 geofences · 10 alerts
Learn more →
Analytics
  • Everything in Professional +
  • Utilisation & occupancy KPIs
  • Fleet dashboards & predictive maintenance
  • Historical playback & process flows
  • Power BI & IFRAME · custom reports
  • 36-month retention · 200 geofences · 50 alerts
Learn more →
Getting started

Book a demo
with our experts

In 30 minutes, our experts will configure the solution that fits your assets and your objectives with you.

A demo tailored to your industry
Live platform configuration
Mounting and field deployment advice
Quote within 24 hours
No commitment

No posts found!