GPS tracker REACT 1215
Hardwired vehicle, NB-IoT + LTE-M, replaceable backup battery
REF. 1215 · GPS · GALILEO · Wi-Fi · BLE 5.0 · NB-IoT · LTE-M
A rugged hardwired tracker powered by the vehicle battery, with a configurable update rate down to one position per minute or per kilometre while driving. If power is cut, the replaceable backup battery takes over and keeps reporting. It also detects BLE-tagged goods carried on board.
Powered by the vehicle,
independent when it is not
Wired to the vehicle battery, the REACT 1215 can report a position as often as once per minute or per kilometre. If power is cut, it keeps running on its own.
NB-IoT + LTE-M
& triple positioning
Dual NB-IoT and LTE-M connectivity on European and North American bands, connectivity included. GNSS outdoors, Wi-Fi and BLE indoors.
Know where the vehicle is,
and what it is carrying
Using Bluetooth 5.0, the REACT 1215 acts as a mobile zone anchor: it detects BLE-tagged assets on board and links them to the vehicle.
FOTA & configuration
fully over the air
The REACT 1215 is managed entirely from the platform: firmware, configuration and time synchronisation, with no physical work on the vehicle.
6 application services included
Every piece of data generated by the REACT 1215 can be used directly from the TRAKmy platform.
Installation in 4 steps
Wire to 10–30 V DC, fix with screws or rivets, activate with a magnet. Allow 30 to 60 minutes per vehicle for a trained installer. The full procedure is detailed in the installation guide PDF.
Full
technical datasheet
A rugged hardwired tracker built for intensive vehicle use, with a backup battery that takes over when power is cut.
| Reference | REACT 1215 |
| Weight | 218 g (excluding power cable) |
| Dimensions | 130 × 72 × 36 mm |
| Colour | White and black |
| Casing | PBT/PC 29 TM-Z2 FR UV LS · Flame-retardant · UV-stabilised |
| Ingress protection | IP67 IK09 · Drop & vibration EN 60068 |
| Connectivity | NB-IoT + LTE-M · European & North American bands · Extended plan included |
| Communication | Bidirectional · Guaranteed data recovery |
| GNSS | Multi-constellation chipset: GPS + GALILEO |
| Wi-Fi | Wi-Fi scanning |
| BLE | Bluetooth Low Energy 5.0 · Proximity beacons · Zone anchor for carried assets |
| Antennas | All internal · Omnidirectional |
| Power supply | 10–30 V DC · Overvoltage protection |
| Consumption | ~3 mA standby · 300 mA max @10 V · 70 mA @30 V |
| Fuse | Recommended > 500 mA and < 1 A · Internal 1 A time-delay fuse |
| Cable | CAB 8600 · 6 m · optional accessory · connectors to be soldered |
| Backup battery | Li-SoCl₂ 12,000 mAh · 3 cells · replaceable |
| Built-in sensors | Activity · Orientation · Virtual tamper · Temperature · Shock |
| Temperature accuracy | ±0.25 °C typical · ±1 °C worst case |
| External BLE sensors | Temperature · Humidity · Fill level · Contact · Magnet |
| Temperature | -20 °C à +60 °C |
| Activation | Magnetic · Green / red LED |
| Mounting | 2 holes · 7×9 mm · 115 mm apart |
| OTA firmware | NB-IoT, LTE-M + BLE · AES encrypted + signed |
| Encryption | ChaCha20 · Unique keys per device |
| Certifications | CE FCC IC BT 5.0 EN 62368-1 |
The tracker ships without a cable: the CAB 8600 (6 m) is offered as an accessory, with connectors that can be soldered at each end to suit the vehicle. Connectivity, however, is included through the Extended plan — no SIM card and no separate data subscription.
Remote management & FOTA
The REACT 1215 is managed entirely from the platform, with no physical handling.
- Vehicle power status
- Backup battery life prediction
- Detailed energy consumption
- Positioning diagnostics
- NB-IoT / LTE-M communication quality
- OTA firmware over NB-IoT, LTE-M + BLE
- Full remote configuration
- Tracker usage profiles
- External environmental sensors
- Rules engine & time sync
- Location & journeys
- Activity & utilisation
- Temperature & shock detection
- Tilt detection
- Carried BLE assets
Certified for Europe & North America
NB-IoT and LTE-M bands approved on both sides of the Atlantic, with a casing qualified for intensive vehicle use.
3 mounting methods
The casing has two 7×9 mm mounting holes 115 mm apart: mechanical fixing with screws or rivets, or drill-free mounting with cable ties and adhesive.
Mechanical fixing through the two mounting holes, 115 mm apart. Maximum resistance to vibration on a chassis, cab floor or metal structure. Through-bolts or rivets depending on the surface.
High-strength double-sided adhesive foam applied under the casing. Permanent adhesion on plastic, painted metal and composite. Printed side up, without exception.
⚠ Degrease the surface before fitting. No metal surface above the tracker.
Plastic or stainless steel ties passed around the casing. Compatible with bars, frames and profiles. Mechanical hold that resists vibration. Horizontal mounting required (max 30° tilt).
Say goodbye to
spreadsheets & logbooks
The TRAKmy platform turns your vehicle fleet's location and journey data into concrete, actionable information. Accessible to everyone, with no IT skills required.
Choose your plan
- Map & journey history
- Basic geofences & entry/exit alerts
- iOS & Android mobile app
- Customisable dashboards
- Pull & Push API
- 12-month data retention
- 50 geofences · 10 alerts
- Everything in Essential +
- Visit and logistics flow analysis
- Scheduled reports & advanced alerts
- Excel & CSV import/export
- MQTT · custom business data
- 24-month retention · 100 geofences · 25 alerts
- Everything in Professional +
- Utilisation & occupancy KPIs
- Fleet dashboards & predictive maintenance
- Historical playback & process flows
- Power BI & IFRAME · custom reports
- 36-month retention · 200 geofences · 50 alerts
Book a demo
with our experts
In 30 minutes, our experts will configure the solution that fits your fleet and your objectives with you.
No posts found!