Skip to content
Professional tracker · LTE Cat 1bis

GPS tracker ULTRA G
Worldwide coverage on LTE Cat 1bis

GPS · GALILEO · Wi-Fi · BLE 5.0 · LTE Cat 1bis

The ULTRA for assets that travel far. Containers, trailers, returnable packaging, exported equipment: track them outside Europe and North America, with the GLOBAL plan included and a built-in eSIM.

Worldwide coverage IP68 & IP69K IK09 10,800 mAh replaceable GNSS + Wi-Fi + BLE CE · FCC · IC
TRAKmy ULTRA G GPS tracker: LTE Cat 1bis, worldwide coverage
Worldwide
GLOBAL plan included
10,800 mAh
Li-SoCl₂ replaceable
LTE Cat 1bis
Built-in eSIM
GLOBAL
Connectivity plan included
IP68/69K
Ingress protection
5 sensors
Built in as standard
-20/+60°C
Temperature range
Worldwide connectivity

One tracker,
worldwide coverage

The GLOBAL plan is tied to the tracker and included. Your assets report from Europe, the Americas, the Middle East, Asia, Oceania and Africa: built-in eSIM, no operator contract, nothing for you to do.

Coverage map of the TRAKmy GLOBAL plan on LTE Cat 1bis
Sea journey of a container: positions stored at sea are sent once the network returns
LTE Cat 1bis, multi-operator roaming
The tracker relies on existing LTE networks and moves from one country to the next with nothing for you to do. Unsure about a country? We check it with you.
Non-permanent roaming handled automatically
Brazil, China, India, the United Arab Emirates and several other countries limit stays to 3 months: the tracker applies the rule on its own, with no intervention.
Data kept while off the network
At sea, in customs or in a dead zone, positions and measurements are stored on board, then sent automatically once the network returns.
Coverage

A single connectivity plan:
GLOBAL, included

With the ULTRA G there is nothing to choose and nothing to add. The GLOBAL plan on LTE Cat 1bis is tied to the tracker when you order and included in the subscription: no coverage option to take out, no pack to add, and nothing to reconfigure when an asset changes continent.

Container tracked from one country to the next thanks to its GPS tracker's connectivity plan
1
Where it communicates
On every continent: all of Europe (including Cyprus, the Balkans and Türkiye), the United States, Canada, Mexico, the Caribbean, Central and South America, the Middle East and the Gulf, the Caucasus and Central Asia, South and South-East Asia, China, Japan, South Korea, Taiwan, Oceania, and a large part of Africa. French overseas territories included: Guadeloupe, Martinique, French Guiana, Saint-Martin, Réunion, French Polynesia.
2
Non-permanent roaming: limited stays
Brazil, China, Egypt, Hong Kong, India, Nigeria, Russia, Ukraine, United Arab Emirates. Local regulations or economic sanctions prohibit permanent roaming there: a stay lasts 3 months at most. The tracker applies the rule on its own and reconnects once it leaves the country. Tell us if an asset has to stay there for long periods: it will be silent part of the time.
3
What is not covered
A few countries remain outside the plan, for example Iran, Venezuela, Cuba, Afghanistan, Mongolia, North Korea, Myanmar, Libya, Sudan and part of Central Africa. Outside coverage, positions are stored, then sent once the network returns. Unsure about a country? We check it with you before you order.
Map and full list of countries For assets that stay in Europe and North America, the ULTRA L+ remains the most energy-efficient choice: see the comparison.
Perspective view of the TRAKmy ULTRA G GPS tracker
Rotate the tracker
The housing in 3D

Built for
long journeys

The format of the ULTRA range, flame-retardant and UV-stabilised, with no external antenna.

  1. 1
    Identifier and QR code
    Each tracker carries its identifier, so you can link it to the asset.
  2. 2
    LED and magnetic activation
    Green and red LED. A magnet is all it takes, without opening the housing.
  3. 3
    Two mounting points
    7 × 9 mm holes, 115 mm apart, for screws or rivets.
  4. 4
    Hardened housing
    IP68 and IP69K, IK09. 130 × 72 × 36 mm and 212 g.
Assets tracked

For assets that leave
Europe and North America

As soon as an asset leaves these regions, you depend on your carriers and customers to know where it is. The ULTRA G keeps it on the same map as the rest of your fleet.

Assets tracked internationally by the ULTRA G tracker: container, tank, trailer, returnable rack and exported machine
Containers, tanks, trailers
At the quayside, in transit or at the customer's site: their position without calling the carrier.
Returnable packaging
Racks, metal pallets, drums: see what stays abroad and does not come back.
Equipment exported or on hire
Machines and equipment on demonstration or on hire internationally.
Positioning of the ULTRA G tracker outdoors by satellite and indoors by Wi-Fi and Bluetooth
Positioning

100% indoor
& outdoor

The tracker switches automatically to the best technology for the environment, in any country. No manual configuration.

Multi-constellation GNSS, GPS + GALILEO
Accurate outdoor positioning on every continent. Fix parameters and priority sequence configurable remotely.
Wi-Fi 2.4 GHz scanning
Indoor positioning with no infrastructure to install: warehouses, workshops, port terminals, wherever the asset is.
TRAKmy BLE geobeacons and Quuppa anchors
Zone-level accuracy as soon as a BLE geobeacon is in range, high accuracy with Quuppa anchors (tested).
Adaptive behaviour of the ULTRA G tracker according to context
On-board intelligence

Adaptive
behaviour

The tracker adapts its behaviour to the context automatically. Departure, arrival, sea crossing, dead zone: all handled.

Departure & arrival detection
Reporting intensity adapted automatically to movement. Fast reaction to departures, energy saved when stationary.
Smart dynamic positions
Reporting steps up on approach to the destination, and switches to periodic mode in long-distance transit or in an area with no network.
GNSS, Wi-Fi, BLE priority sequence
Order of positioning technologies, indoor algorithm and scanning strategies, all configurable remotely.
Remote configuration of the ULTRA G tracker: zones, schedule, thresholds and sensors
Full configurability

Fully configurable
over the air

Every aspect of the tracker's behaviour can be configured remotely, with no physical handling and no site visit, even when the asset is on the other side of the world.

Positioning frequency and conditions
Based on movement, on context, periodic or scheduled. Update rate and journey detection fully configurable.
On-board rules engine
Business rules directly in the tracker: departure and arrival alerts, temperature or shock thresholds, sensor aggregation (edge processing).
Remote firmware via LTE Cat 1bis and BLE
Signed and encrypted updates, deployed from the platform to one tracker or to the whole fleet.
Sensors

5 sensors built in as standard
and optional external BLE sensors

Activity, orientation, protection against vandalism, temperature and shock: all native, with no additional wiring. And external BLE sensors to go further.

The sensors of the ULTRA G tracker: activity, orientation, tamper, temperature, shock and BLE
Activity
Detects movement and vibration, so you can see when your assets are in use.
Configurable · OTA
Orientation
Detects the orientation and tilt of the asset. Alert if the tracker is turned over or tilted abnormally.
Professional and Analytics plans
Virtual tamper
Detects handling or attempted removal with no physical sensor. Fully configurable software algorithm.
Configurable algorithm · OTA
Temperature
Monitoring from -20 °C to +60 °C, typical accuracy ±0.25 °C (±1 °C worst case). Thresholds and alerts configurable from the platform.
±0.25 °C typical · Alerts
Shock
Configurable shock detection: thresholds adjustable remotely to document rough handling and drops.
Configurable thresholds · OTA
External BLE sensors
Temperature, humidity, fill level, door contact, magnet. Other BLE sensors can be added to suit your needs.
Wireless · Professional plan
Comparison

ULTRA G vs ULTRA L+
Which tracker should you choose?

The ULTRA G and the ULTRA L+ share the same housing, the same sensors, the same positioning technologies and the same battery. One difference, and it is decisive: the network, and therefore the part of the world where your assets stay visible.

ULTRA G (this page) ULTRA L+ → see the page
Network connectivityLTE Cat 1bisWorldwideNB-IoT + LTE-M
Connectivity planGLOBAL · worldwide coverage · includedEurope and North America · included
Area of useEurope, the Americas, the Middle East, Asia, Oceania, a large part of AfricaEurope, North America, Japan, New Zealand, Taiwan, South Africa
SIM card✓ Built-in eSIM · plan included✓ Built-in eSIM · plan included
GNSS (outdoor)✓ GPS + GALILEO✓ GPS + GALILEO
Wi-Fi positioning✓ Wi-Fi 2.4 GHz✓ Wi-Fi 2.4 GHz
BLE geobeacons (indoor)✓ TRAKmy geobeacons✓ TRAKmy geobeacons
High-accuracy indoor✓ Quuppa tested✓ Quuppa tested
Built-in sensors✓ 5: activity, orientation, tamper, temperature, shock✓ 5: activity, orientation, tamper, temperature, shock
External BLE sensors✓ Temperature, humidity, level, contact, magnet✓ Temperature, humidity, level, contact, magnet
BatteryLi-SoCl₂ · 10,800 mAh · ReplaceableLi-SoCl₂ · 10,800 mAh · Replaceable
Battery lifeLong battery life · depends on reporting frequency (LTE Cat 1bis draws more than NB-IoT)Up to 10 years depending on reporting frequency
Housing & dimensions130×72×36 mm · 212 g · IP68/IP69K · IK09130×72×36 mm · 212 g · IP68/IP69K · IK09
CertificationsCE · FCC · IC · BT 5.0CE · FCC · IC · BT 5.0
OTA firmware✓ LTE Cat 1bis + BLE✓ NB-IoT / LTE-M + BLE
Off-network data✓ Stored, then sent✓ Stored, then sent
SaaS platform✓ Identical✓ Identical
Ideal for…Assets that leave Europe and North America: containers, trailers, returnable packaging, equipment exported or hired out internationallyMobile or static assets that stay in Europe and North America, with the longest battery life
✓ Choose the ULTRA G if…
  • ·Your assets cross the borders of Europe and North America
  • ·You ship or hire out equipment in Asia, the Middle East, Africa or Latin America
  • ·You track containers, trailers or returnable packaging on import-export flows
  • ·You want a single model for a fleet spread across several continents
✓ Choose the ULTRA L+ if…
  • ·Your assets stay in Europe or North America
  • ·You want the longest possible battery life at the same reporting frequency
  • ·You want NB-IoT + LTE-M redundancy across a European fleet
See the ULTRA L+ →
Specifications

Full technical
specifications

All hardware values, taken from the product datasheet.

TRAKmy ULTRA G GPS tracker: LTE Cat 1bis, worldwide coverage
Weight212 g
Dimensions130 × 72 × 36 mm
ColourWhite
Ingress protectionIP68 IP69K
Impact resistanceIK09 · vibration EN 60068
ConnectivityLTE Cat 1bis · GLOBAL plan included · built-in eSIM
CoverageWorldwide coverage · multi-operator roaming
GNSSMulti-constellation: GPS + GALILEO
Wi-Fi2.4 GHz scanning · Wi-Fi positioning
BLEBluetooth Low Energy 5.0 · geobeacons · zone anchors and Quuppa
AntennasAll internal · Omnidirectional
BatteryLi-SoCl₂ · 3 cells · User-replaceable
Capacity10,800 mAh · 2.94 g of lithium
Battery lifeLong battery life · depends on reporting frequency
Built-in sensorsActivity · Orientation · Virtual tamper · Temperature · Shock
Temperature accuracy±0.25 °C typical · ±1 °C worst case
External BLE sensorsTemperature · Humidity · Level · Contact · Magnet
Off-network dataStored on board, sent once the network returns
Temperature-20 °C to +60 °C
HousingPBT+PC / PBT GF30%+TPE · Flame-retardant · UV-stabilised
Mounting2 holes 7 × 9 mm · 115 mm apart
ActivationMagnetic · green / red LED
OTA firmwareLTE Cat 1bis + BLE · AES encrypted + signed
EncryptionChaCha20 · Unique keys per device
CertificationsCE FCC IC BT 5.0 EN 62368
Commissioning

Magnetic activation · 3 steps

A simple magnet, without opening the housing. Trackers are delivered inactive, and LED feedback shows their status.

1
Red LED: keep the magnet in place
● Red LED
Magnet on the logo, about 5 seconds

The red LED comes on first. Do not remove the magnet.

→
2
Green LED flashing: remove the magnet

The tracker is activated and ready to use.

→
3
Online on the platform: install

Wait for the "online" status before fixing the tracker to the asset.

Field installation tips

☀
Activate outdoors if possible, under open sky.
↑
Position it as high as possible for better network coverage.
⊙
Install it upright, logo at the top, with a clear view of the sky.
✗
Do not cover the tracker with metal or carbon fibre.
✓
Flat, clean surface, away from parts exposed to frequent shocks or vibration.
🌡
On metal exposed to the sun: fit a thermal insulator in between (wood, plastic).
⚠ Possible network delay on activation

If "online" does not appear within 5 min, hold the magnet in place again for 5 s. Try again every 5 min. The tracker retries automatically after 24 hours.

Services

Remote management & OTA

The ULTRA G is managed entirely from the platform, with no physical handling, wherever the asset is.

01
Diagnostics
  • Battery life prediction
  • Detailed energy consumption
  • Positioning diagnostics
  • LTE Cat 1bis network quality
  • Installation status
02
Remote management
  • OTA firmware LTE Cat 1bis + BLE
  • Full OTA configuration
  • Tracker usage profiles
  • External BLE sensor management
  • Time synchronisation
03
Application services
  • Location & journeys
  • Operating hours
  • Temperature · tilt · shock
  • Orientation & tamper
  • Environmental sensors
Certifications

CE, FCC and IC certified

CE for the European Union, FCC for the United States, IC for Canada. Your assets then travel in the countries of the GLOBAL plan. For a long-term deployment in another country, we review its requirements with you.

European Union
United States
IC
Canada
IP68
Prolonged immersion
IP69K
High-pressure jets
IK09
10 joule impact
BT 5.0
D068598
EN 62368
Electrical safety

Field installation

6 mounting options

From high-strength permanent mounting to instant temporary fitting.

Mounting holes: 2 positions · 115 mm apart · 7×9 mm openings
🔩
Rivets
Permanent mounting

Quick, permanent fitting through the 2 mounting holes (115 mm apart, 7×9 mm openings). Ideal on skips, metal crates and perforated structures.

PermanentQuick to fit
🔩
Screws & nuts
Removable mounting

Bolted through the eyelets of the housing. Removable with standard tools. Suited to flat surfaces that can be drilled (metal, wood, composite).

RemovableFlat surfaces
🪢
Cable ties
Tubes · Bars · Profiles

Plastic or stainless-steel ties passed through the eyelets of the tracker. They fit tubes, bars, frames and profiles of any section. No drilling.

No drillingVersatile
🏭
Industrial adhesive
Surfaces that cannot be drilled

High-strength structural adhesive (such as Tec7 X-Tack). The housing is bonded directly to clean, degreased surfaces. Withstands weather and vibration.

⚠ Difficult to remove once cured.

StructuralAll surfaces
🧲
Magnetic mounting kit
Removable · Instant

Magnetic plate screwed to the housing. Fitted and removed in seconds on any ferrous surface. Ideal for shared assets or frequent rotation.

RemovableSteel · Ferritic stainless steel
🏷️
Double-sided tape
No drilling · Smooth surfaces

High-strength double-sided adhesive foam applied under the housing. Permanent adhesion on plastic, painted metal and composite. Withstands UV and weather.

⚠ Degrease the surface before fitting.

No drillingUV-resistant
On a container

Fit the tracker outside, high up, never inside a metal container and never with metal above it. We recommend a trial on a real asset before you deploy.

SaaS platform

Say goodbye to
spreadsheets & logbooks

The TRAKmy platform turns the location and activity data of your assets into practical information you can act on. Open to everyone, with no IT skills needed.

Your trackers send their data straight to the platform. A powerful search engine, visual dashboards and automatic alerts give you full visibility of your fleet.

TRAKmy platform interface: asset map
Asset map
Find any asset in a few seconds. Quick search, filters by zone, status or equipment type.
Dashboards
See the utilisation, inventory and activity of your assets. Dashboards you can customise and export.
Automatic alerts
Get a notification as soon as an asset moves unexpectedly, crosses a threshold or leaves a geofence.
Secure data
SSO (Single Sign-On) with your company credentials. Granular access control by team or role.
ERP & API integration
Connect your existing ERP through an open API. Enrich the platform with your business data (shipments, vehicles…).
Mobile app
Manage your assets in the field. Tracker activation, proximity location, inspection and alerts, on iOS & Android.
Tracker management

Manage your trackers
from your desk

Remote firmware updates (OTA), reconfiguration, battery and network quality diagnostics: everything is done from the platform, even for an asset on the other side of the world. No physical intervention required.

Simultaneous OTA update of all trackers
Battery life prediction per tracker
Cellular network quality and GPS accuracy
Automatic recovery of offline data
OTA
Contactless update
Auto
Offline data recovery
170+
Connectivity plan included
SSO
Secure sign-in
Subscriptions

Choose your plan

Essential
  • Map & journey history
  • Basic geofences & entry/exit alerts
  • iOS & Android mobile app
  • Customisable dashboards
  • Pull & Push API
  • 12-month data retention
  • 50 geofences · 10 alerts
Find out more →
Analytics
  • Everything in Professional +
  • Utilisation KPIs & occupancy rate
  • Fleet dashboards & predictive maintenance
  • History playback & process flows
  • Power BI & IFRAME · custom reports
  • 36-month retention · 200 geofences · 50 alerts
Find out more →
Frequently asked questions

Worldwide GPS tracker:
your questions

In which countries does the ULTRA G GPS tracker work?

On every continent, with the GLOBAL connectivity plan on LTE Cat 1bis: all of Europe, North and South America, the Middle East, Asia (China, India, Japan, South-East Asia), Oceania and a large part of Africa. Connectivity is included, with a built-in eSIM and no operator contract. A few countries remain outside the plan: we check your list with you before you order.

Can an asset stay in China, India or Brazil for a long time?

Not continuously with permanent coverage. In Brazil, China, Egypt, Hong Kong, India, Nigeria, Russia, Ukraine and the United Arab Emirates, permanent roaming is prohibited: a stay lasts 3 months at most. The tracker applies this rule on its own. An asset that stays there for long periods will be silent part of the time: tell us before you deploy.

What happens at sea or off the network?

The tracker stores its positions and measurements on board, then sends them automatically once coverage returns. You then see the journey on the platform. During the gap, no alert can be sent.

What is the difference between the ULTRA G and the ULTRA L+?

Same housing, same sensors, same positioning functions (GNSS, Wi-Fi, BLE) and same replaceable 10,800 mAh battery. The difference lies in the network: the ULTRA L+ communicates over NB-IoT and LTE-M, mainly in Europe and North America, and the ULTRA G over LTE Cat 1bis on the GLOBAL plan. For assets that stay in these regions, the ULTRA L+ remains the most energy-efficient. As soon as they leave, choose the ULTRA G.

Does the ULTRA G tracker need a SIM card or a subscription?

The tracker has a built-in eSIM, so there is nothing to insert, and LTE Cat 1bis connectivity is included in the GLOBAL plan tied to the tracker. A subscription to the TRAKmy platform (Essential, Professional or Analytics) is required for mapping, alerts and remote management. The plan is tied to the tracker for good: you choose the right model at the outset.

What is the battery life of the ULTRA G?

It depends on how often positions are reported, on the number of active sensors and on network conditions: LTE Cat 1bis draws more than NB-IoT at the same reporting frequency. The 10,800 mAh Li-SoCl₂ battery is user-replaceable. The platform shows a battery life prediction for each tracker, and we size the reporting frequency with you to suit your journeys.

Which assets can you track with the ULTRA G?

Any unpowered asset that leaves Europe or North America: containers and tanks, trailers and chassis, returnable packaging (racks, metal pallets, drums), exported machines, equipment on hire or on demonstration internationally. Rated IP68/IP69K and IK09, it is made for industrial, port and construction site environments.

Where should you fit the ULTRA G on a container?

Outside, high up and upright, with a clear view of the sky. Never inside a metal container, and never with metal above the tracker: the signal would be weakened or blocked. Run a trial on a real asset before you deploy.

Does the ULTRA G work indoors?

Yes. In a warehouse or workshop, it locates itself by Wi-Fi 2.4 GHz scanning with no infrastructure, by TRAKmy BLE geobeacons for zone-level accuracy, or by Quuppa anchors (tested) for high accuracy.

Can the ULTRA G be deployed anywhere in the world?

It is CE, FCC and IC certified. It is ordered for fleets managed in Europe or North America, then follows your assets in the countries of the GLOBAL plan. For a long-term deployment in a specific country, we review its local requirements with you before you order.

Getting started

Book a meeting
with our experts

In 30 minutes, our experts check with you the coverage of the countries where you operate and configure the solution that suits your assets.

Coverage checked country by country
Demo tailored to your industry
Sizing of reporting frequency and battery life
Costing and quote within 24 hours
No commitment