Skip to content
Professional tracker · ATEX · IECEx

GPS tracker ULTRA ATEX
Certified for explosive atmospheres

GPS · GALILEO · Wi-Fi · BLE 5.0 · NB-IoT · LTE-M

Launch planned for early 2027

The ULTRA made for classified zones. Tank containers, IBCs, ADR trailers: track assets that stand in, or pass through, an area with an explosion risk, on the same platform as the rest of your fleet.

ATEX II 2 GD IECEx Zones 1 · 2 · 21 · 22 IP68 & IP69K IK09 NB-IoT + LTE-M GNSS + Wi-Fi + BLE
TRAKmy ULTRA ATEX GPS tracker with its Ex II 2 GD marking
II 2 GD
Gas and dust
Up to 10 years
Depending on reporting frequency and conditions
NB-IoT + LTE-M
Built-in eSIM
ATEX IECEx
Dual certification
IP68/69K
Ingress protection
5 sensors
Built in as standard
-20/+60°C
Ambient temperature
Classified zones

Where to install the ULTRA ATEX

The II 2 GD marking allows installation in zones where an explosive atmosphere may form occasionally, for gas and dust alike, as well as in less exposed zones.

ULTRA ATEX tracker on a classified site: gas on one side, dust on the other
Gas and vapours
✕
Zone 0
Explosive atmosphere present continuously or frequently, for example inside a tank
✓
Zone 1
Explosive atmosphere likely to occur occasionally in normal operation
✓
Zone 2
Explosive atmosphere rare and of short duration
Dust
✕
Zone 20
Cloud of combustible dust present continuously or frequently
✓
Zone 21
Dust cloud likely to occur occasionally in normal operation
✓
Zone 22
Dust cloud rare and of short duration
Reading the marking
II 2 GD
Surface industries, excluding mines. Category 2. Gas (G) and dust (D).
Ex ib IIC T4 Gb
Intrinsic safety. All gas groups, up to group IIC. Temperature class T4 (135 °C).
Ex ib IIIC T135 °C Db
Intrinsic safety. All dusts, including conductive dusts. Surface limited to 135 °C.
Zone classification remains your responsibility

It is drawn up by the site operator, in its explosion protection document. Check that the tracker's marking suits your products and your zones before any installation.

Perspective view of the TRAKmy ULTRA ATEX GPS tracker
Rotate the tracker
The housing in 3D

Built for
harsh environments

The format of the ULTRA range, flame-retardant and UV-stabilised, with no external antenna.

  1. 1
    Ex marking
    II 2 GD marking and temperatures, on the tracker's label.
  2. 2
    LED and magnetic activation
    Green and red LED. A magnet is all it takes, without opening the housing.
  3. 3
    Two mounting points
    7 × 9 mm holes, 115 mm apart, for screws or rivets.
  4. 4
    Hardened housing
    IP68 and IP69K, IK09. 130 × 72 × 36 mm and 270 g.
Assets tracked

For assets that enter
classified zones

Any dangerous goods asset that stands in a classified zone, or passes through one during transport or manufacturing, joins your existing fleet: journeys, utilisation rate, shocks and operating hours in a single view.

Tank containers
Location, site arrivals and departures, fleet rotation.
UN 31A/Y certified IBCs
Intermediate bulk containers, tracked between sites and customers.
ADR certified trailers
Position, activity and shocks during transport.
Connectivity

Dual network NB-IoT and LTE-M,
EXTENDED plan included

The EXTENDED plan is tied to the tracker and included. Your assets report from Europe and North America, with a built-in eSIM and no operator contract.

Coverage map of the TRAKmy EXTENDED plan on NB-IoT and LTE-M
NB-IoT and LTE-M
Low-power transceiver, internal omnidirectional antenna, two-way communication.
Data recovered after a network gap
Off the network, positions and measurements are stored on board, then sent automatically once coverage returns.
Network and certification are two separate matters
Being covered by the network does not mean the certificate is recognised. Outside the European Union, check the local requirement for your classified zones.
Automatic indoor and outdoor positioning of the ULTRA ATEX tracker
Positioning

100% indoor
& outdoor

The tracker switches automatically to the best technology for the environment, indoors and outdoors. No manual configuration.

Multi-constellation GNSS, GPS + GALILEO
Outdoor positioning by satellite. Fix parameters and priority sequence configurable remotely.
Wi-Fi 2.4 GHz scanning
Indoor positioning with no infrastructure to install: warehouses, workshops, terminals, wherever the asset is.
TRAKmy BLE geobeacons
Zone-level accuracy as soon as a BLE geobeacon is in range. Geobeacons are not ATEX certified: install them outside classified zones.
Adaptive behaviour of the ULTRA ATEX tracker according to context
On-board intelligence

Adaptive
behaviour

The tracker adapts its behaviour to the context automatically. Departure, arrival, transit, dead zone: all handled.

Departure & arrival detection
Reporting intensity adapted automatically to movement. Fast reaction to departures, energy saved when stationary.
Smart dynamic positions
Reporting steps up on approach to the destination, and switches to periodic mode in long-distance transit or in an area with no network.
GNSS, Wi-Fi, BLE priority sequence
Order of positioning technologies, indoor algorithm and scanning strategies, all configurable remotely.
Remote configuration of the ULTRA ATEX tracker: zones, schedule, thresholds and sensors
Full configurability

Fully configurable
over the air

Every aspect of the tracker's behaviour can be configured remotely, with no physical handling and no trip into the classified zone.

Positioning frequency and conditions
Based on movement, on context, periodic or scheduled. Update rate and journey detection fully configurable.
On-board rules engine
Business rules directly in the tracker: departure and arrival alerts, temperature or shock thresholds, sensor aggregation (edge processing).
Remote firmware via NB-IoT, LTE-M and BLE
Signed and encrypted updates, deployed from the platform to one tracker or to the whole fleet.
Sensors

5 sensors built in as standard
and external BLE sensors, outside classified zones

Activity, orientation, protection against vandalism, temperature and shock: all native, with no additional wiring, and covered by the tracker's certificate.

The sensors of the ULTRA ATEX tracker: activity, orientation, tamper, temperature, shock and BLE
Activity
Sub-minute measurement of movement and vibration to calculate the actual hours of use of your assets.
Sub-minute accuracy · OTA
Orientation
Detects the orientation and tilt of the asset. Alert if the tracker is turned over or tilted abnormally.
Configurable · Regular monitoring
Virtual tamper
Detects handling or attempted removal with no physical sensor. Fully configurable software algorithm.
Configurable algorithm · OTA
Temperature
Monitoring from -20 °C to +60 °C, typical accuracy ±0.25 °C (±1 °C worst case). Thresholds and alerts configurable from the platform.
±0.25 °C typical · Alerts
Shock
Configurable shock detection, 16 g range: thresholds adjustable remotely to document rough handling and drops.
Configurable thresholds · OTA
External BLE sensors
Temperature, humidity, fill level, contact, magnet. They are not ATEX certified: install them only outside classified zones.
Wireless · Professional plan
Comparison

ULTRA ATEX vs ULTRA L+
Which tracker should you choose?

The ULTRA ATEX takes the format, the dual network and the sensors of the ULTRA L+. It adds certification for classified zones, with three trade-offs: a little more weight, a non-replaceable battery and mounting limited to screws and rivets.

ULTRA ATEX (this page) ULTRA L+ → see the page
Reference1105 EX1105
Explosive zone certificationATEX + IECExClassified zonesNot certified · no installation in classified zones
Network connectivityNB-IoT + LTE-MNB-IoT + LTE-M
Connectivity planEXTENDED · includedEXTENDED · included
SIM card✓ Built-in eSIM · plan included✓ Built-in eSIM · plan included
GNSS (outdoor)✓ GPS + GALILEO✓ GPS + GALILEO
Wi-Fi positioning✓ Wi-Fi 2.4 GHz✓ Wi-Fi 2.4 GHz
BLE geobeacons (indoor)✓ TRAKmy geobeacons, outside classified zones✓ TRAKmy geobeacons
Built-in sensors✓ 5: activity, orientation, tamper, temperature, shock✓ 5: activity, orientation, tamper, temperature, shock
External BLE sensors✓ Outside classified zones only✓ Temperature, humidity, level, contact, magnet
BatteryLi-SoCl₂ · 10,800 mAh · Non-replaceableLi-SoCl₂ · 10,800 mAh · Replaceable
Battery lifeUp to 10 years depending on reporting frequency and environmental conditionsUp to 10 years depending on reporting frequency
Housing & dimensions130×72×36 mm · 270 g · IP68/IP69K · IK09130×72×36 mm · 212 g · IP68/IP69K · IK09
MountingFixed installation · screws or rivets6 options, including a magnetic kit
Other certificationsCE · FCC · BT 5.0CE · FCC · BT 5.0
OTA firmware✓ NB-IoT / LTE-M + BLE✓ NB-IoT / LTE-M + BLE
Off-network recovery✓ Stored, then sent✓ Stored, then sent
SaaS platform✓ Identical✓ Identical
Ideal for…Assets that stand in or pass through classified zones: tank containers, IBCs, ADR trailersMobile or static assets outside explosive atmospheres
✓ Choose the ULTRA ATEX if…
  • ·Your assets stand in zone 1, 2, 21 or 22
  • ·They pass through classified zones during transport or manufacturing
  • ·You carry dangerous goods in tanks, IBCs or ADR trailers
  • ·You want a single view with the rest of your fleet
✓ Choose the ULTRA L+ if…
  • ·Your assets never enter a classified zone
  • ·You want to be able to replace the battery
  • ·You need removable mounting, for example magnetic
See the ULTRA L+ →
Specifications

Full technical
specifications

All certification and hardware values, taken from the product datasheet.

TRAKmy ULTRA ATEX GPS tracker with its Ex II 2 GD marking
CertificationATEX IECEx
MarkingII 2 GD · Ex ib IIC T4 Gb · Ex ib IIIC T135 °C Db
Ambient temperature-20 °C ≤ Ta ≤ +60 °C
Maximum altitudeATEX 2,000 m · IECEx 4,000 m
Weight270 g (9.5 oz)
Dimensions130 × 72 × 36 mm
ColourWhite
Ingress protectionIP68 IP69K
Impact resistanceIK09 · drop and vibration EN 60068
ConnectivityNB-IoT + LTE-M · EXTENDED plan included · built-in eSIM
CoverageEurope and North America
GNSSMulti-constellation: GPS + GALILEO
Wi-Fi2.4 GHz scanning · Wi-Fi positioning
BLEBluetooth Low Energy 5.0 · geobeacons · detectable by zone anchors
AntennasAll internal · Omnidirectional
BatteryLi-SoCl₂ · 3.6 V · 3 cells · Non-replaceable
Capacity10,800 mAh · 2.94 g of lithium
Battery lifeUp to 10 years depending on reporting frequency and environmental conditions
Built-in sensorsActivity · Orientation · Virtual tamper · Temperature · Shock (16 g range)
Temperature accuracy±0.25 °C typical · ±1 °C worst case
External BLE sensorsTemperature · Humidity · Level · Contact · Magnet · not ATEX certified
Off-network recoveryStored on board, sent once the network returns
HousingPBT+PC / PBT GF30%+TPE · Flame-retardant · UV-stabilised
MountingFixed installation · screws or rivets · 2 holes 7 × 9 mm · 115 mm apart
ActivationMagnetic · green / red LED
OTA firmwareNB-IoT, LTE-M + BLE · AES encrypted + signed
EncryptionChaCha20 · Unique keys per device
Other certificationsCE FCC BT 5.0 IEC 62368-1
Commissioning

Magnetic activation · 3 steps

A simple magnet, without opening the housing. Trackers are delivered inactive, and LED feedback shows the status throughout.

1
Red LED: keep the magnet in place
● Red LED
Magnet on the logo, about 5 seconds

The red LED comes on first. Do not remove the magnet.

→
2
Green LED flashing: remove the magnet

The tracker is activated and ready to use.

→
3
Online on the platform: install

Wait for the "online" status before fixing the tracker to the asset.

Field installation tips

☀
Activate outdoors if possible, under open sky.
↑
Position it as high as possible for better network coverage.
⊙
Install it upright, never upside down, with a clear view of the sky.
✗
Do not cover the tracker with metal or carbon fibre.
✓
Flat, clean surface, away from parts exposed to frequent shocks or vibration.
🌡
On metal exposed to the sun: fit a thermal insulator in between (wood, plastic).
⚠ Possible network delay on activation

If "online" does not appear within 5 min, hold the magnet in place again for 5 s. Try again every 5 min. The tracker retries automatically after 24 hours.

Services

Remote management & OTA

The ULTRA ATEX is managed entirely from the platform, with no physical work on the asset.

01
Diagnostics
  • Battery life prediction
  • Detailed energy consumption
  • Positioning diagnostics
  • Communication quality
  • Installation status
02
Remote management
  • OTA firmware NB-IoT, LTE-M + BLE
  • Full OTA configuration
  • Tracker usage profiles
  • External BLE sensor management
  • Time synchronisation
03
Application services
  • Location & journeys
  • Operating hours
  • Temperature · tilt · shock
  • Orientation & tamper
  • Environmental sensors
Certifications

ATEX and IECEx certified

ATEX for the European Union, IECEx for markets that recognise this international scheme. On top of these come the radio and durability certifications of the ULTRA range.

II 2 GD
Ex ib
European Union
United States
IP68
Prolonged immersion
IP69K
High-pressure jets
IK09
10 joule impact
BT 5.0
D068598
IEC 62368
Electrical safety
Certificates
ATEX : DEKRA 26ATEX0011X
IECEx : IECEx DEK 26.0004X
Standards
Directive 2014/34/EU
EN 60079-0 · IEC 60079-0
EN 60079-11 · IEC 60079-11
Limits of use
-20 °C ≤ Ta ≤ +60 °C
Altitude: ATEX 2,000 m, IECEx 4,000 m

Field installation

A fixed installation,
with screws or rivets

The certification requires a fixed installation, carried out by qualified personnel and in the zones covered by the certificate.

Mounting holes: 2 positions · 115 mm apart · 7×9 mm openings
🔩
Rivets
Permanent mounting

Permanent fitting through the 2 mounting holes. Suited to structures that can be drilled.

Permanent
🔩
Screws
Fitted with tools

Screwed through the 2 holes of the housing, on a flat, clean surface.

Flat surfaces
🚫
Removable mounting
Not offered

No magnetic kit on this model. For any other mounting, ask us before you order.

Ask us
Before drilling

Check that drilling does not weaken the structure of the equipment. If in doubt, ask its manufacturer. This is essential on pressure equipment or equipment that carries dangerous goods.

Special conditions of use (X)
  • Non-metallic housing: risk of electrostatic charge.
  • Fixed installation mandatory.
  • Install away from any build-up of electrostatic charge: flowing dust, strong air flow, surfaces rubbing together.
  • Clean with a damp cloth only, never with a dry cloth.
  • Do not open the device, do not drop it, do not change the battery.
  • Only the tracker is ATEX and IECEx certified: BLE beacons, sensors and anchors are not.
SaaS platform

Say goodbye to
spreadsheets & logbooks

The TRAKmy platform turns the location and activity data of your assets into practical information you can act on. Open to everyone, with no IT skills needed.

Your trackers send their data straight to the platform. A powerful search engine, visual dashboards and automatic alerts give you full visibility of your fleet.

TRAKmy platform interface: asset map
Asset map
Find any asset in a few seconds. Quick search, filters by zone, status or equipment type.
Dashboards
See the utilisation, inventory and activity of your assets. Dashboards you can customise and export.
Automatic alerts
Get a notification as soon as an asset moves unexpectedly, crosses a threshold or leaves a geofence.
Secure data
SSO (Single Sign-On) with your company credentials. Granular access control by team or role.
ERP & API integration
Connect your existing ERP through an open API. Enrich the platform with your business data (shipments, vehicles…).
Mobile app
Manage your assets in the field. Tracker activation, proximity location, inspection and alerts, on iOS & Android.
Tracker management

Manage your trackers
from your desk

Remote firmware updates (OTA), reconfiguration, battery and network quality diagnostics: everything is done from the platform, even for an asset on the other side of the world. No physical intervention required.

Simultaneous OTA update of all trackers
Battery life prediction per tracker
Cellular network quality and GPS accuracy
Automatic recovery of offline data
OTA
Contactless update
Auto
Offline data recovery
2
NB-IoT and LTE-M networks
SSO
Secure sign-in
Subscriptions

Choose your plan

Essential
  • Map & journey history
  • Basic geofences & entry/exit alerts
  • iOS & Android mobile app
  • Customisable dashboards
  • Pull & Push API
  • 12-month data retention
  • 50 geofences · 10 alerts
Find out more →
Analytics
  • Everything in Professional +
  • Utilisation KPIs & occupancy rate
  • Fleet dashboards & predictive maintenance
  • History playback & process flows
  • Power BI & IFRAME · custom reports
  • 36-month retention · 200 geofences · 50 alerts
Find out more →
Frequently asked questions

ATEX GPS tracker:
your questions

In which ATEX zones can the ULTRA ATEX be installed?

In zones 1 and 2 for gas, and in zones 21 and 22 for dust. Its II 2 GD marking corresponds to a category 2 device. It is not intended for zones 0 and 20. The classification of the zones on your site is still drawn up by the site operator, in its explosion protection document.

What does the ULTRA ATEX marking mean?

II 2 GD: device for surface industries, category 2, gas and dust. Ex ib IIC T4 Gb: intrinsic safety, all gas groups, surface temperature limited to class T4 (135 °C). Ex ib IIIC T135 °C Db: intrinsic safety, all dusts, including conductive dusts, maximum surface temperature of 135 °C. Ambient temperature: -20 °C to +60 °C.

How is the ULTRA ATEX fixed to an asset?

A fixed installation is mandatory: the tracker is screwed or riveted to the asset by qualified personnel, through its two 7 × 9 mm holes (115 mm apart). No magnetic or removable mounting. Before drilling, check with the equipment manufacturer that drilling does not weaken its structure.

Is the ULTRA ATEX battery replaceable?

No. Unlike the ULTRA L+, the 10,800 mAh Li-SoCl₂ battery is not replaceable and the device must never be opened. It offers up to 10 years of battery life depending on reporting frequency and environmental conditions, and the platform shows a battery life prediction.

Are BLE sensors and geobeacons ATEX certified?

No. Only the tracker is ATEX and IECEx certified. BLE beacons, sensors and anchors are not: they must not be installed in a classified zone.

What is the difference between the ULTRA ATEX and the ULTRA L+?

Same format, same NB-IoT and LTE-M dual network, same built-in sensors and same EXTENDED connectivity plan. The ULTRA ATEX adds ATEX and IECEx certification for classified zones. In return, it weighs 270 g instead of 212 g, its battery is not replaceable and its mounting is limited to screws and rivets.

When will the ULTRA ATEX be available?

The launch is planned for early 2027. You can present your project to us now, so that we can review your zones, your assets and your network coverage.

Getting started

Book a meeting
with our experts

In 30 minutes, our experts review your assets, your zones and your network coverage, ahead of the launch planned for early 2027.

Network coverage of your sites checked
Review of your assets and classified zones
Platform demonstration
Sizing of reporting frequency and battery life
No commitment